If you’ve recently purchased a Lenovo wireless keyboard or replaced its USB dongle, you might need to pair the keyboard with the dongle to make it work.
Thankfully, the process is straightforward and can be done quickly with the right steps. This guide will walk you through the process of pairing your Lenovo keyboard with its dongle.
Step 1: Gather the Necessary Items
Before you begin, make sure you have everything you need:
- Lenovo Wireless Keyboard
- USB Dongle (original or replacement)
- Fresh Batteries (if your keyboard uses batteries)
- Your Computer
The dongle is located in the battery compartment of the keyboard (see picture below)
Step 2: Insert the Dongle into Your Computer
- Plug the Lenovo USB dongle into an available USB port on your computer.
- Wait for the system to recognize the dongle and install any necessary drivers.
- On most systems, this happens automatically.
- You’ll see a notification indicating that the device is ready to use.
Step 3: Power on the Keyboard
- Ensure the keyboard has working batteries if required.
- Locate the Power Switch (usually on the back or side of the keyboard) and switch it to the “On” position.
Step 4: Activate Pairing Mode
- Find the Pairing Button on the keyboard.
- This is often located near the battery compartment or on the back of the keyboard.
- Press and hold the pairing button for about 5 seconds until the keyboard’s indicator light begins to blink.
- This blinking light indicates that the keyboard is in pairing mode and ready to connect.
Step 5: Use Lenovo’s Pairing Utility (If Required)
If your keyboard doesn’t automatically pair with the dongle, you may need to use Lenovo’s pairing software:
- Visit the Lenovo Support Website and download the wireless keyboard pairing utility for your specific keyboard model.
- Install and launch the pairing utility on your computer.
- Follow the on-screen instructions to complete the pairing process.
Step 6: Test the Keyboard
- Once pairing is complete, test the keyboard by typing on it to ensure it’s working properly.
- If the keyboard doesn’t respond, repeat the pairing process or check for potential issues (see the troubleshooting section below).
Troubleshooting Common Issues
If your Lenovo keyboard doesn’t pair or work properly, try these steps:
- Check the Dongle: Ensure the dongle is securely plugged into the USB port. Try a different port if necessary.
- Replace the Batteries: If the keyboard isn’t responding, the batteries might be low or dead.
- Reinstall Drivers: Unplug the dongle, restart your computer, and plug the dongle back in to reinstall drivers.
- Reset the Keyboard: Some Lenovo keyboards have a reset button or require a long press on the pairing button to reset. Refer to the user manual for specific instructions.
- Ensure Compatibility: Make sure the dongle is compatible with your Lenovo keyboard. Contact Lenovo support if you’re unsure.
Summary
Pairing your Lenovo keyboard with its dongle is a simple process that can be completed in just a few steps. With the right setup, you’ll have your keyboard working in no time. If you encounter any issues, Lenovo’s support team and online resources are always there to help. Now you’re ready to enjoy hassle-free typing with your Lenovo wireless keyboard!
