Table of Contents
There are many issues around Baofeng Radios and FM (Frequency Modulation) reception. In this post we have documented troubleshooting tips to help solve the problem.
Table of Contents
Background
Many people who purchased Baofeng UV-5R and others similar radios over the past couple of years have been asking why they can’t receive FM Radio
Baofeng radios operate in the frequency range of 68 MHz to 520 MHz. Specifically they support bands shown in the table below. Note that transmission and reception are restricted to specific bands.
🏷️ Baofeng Radio Deals ⭐⭐⭐⭐⭐
UV-5R Frequency Range Specifications
Application | Frequency Range |
---|---|
Transmission | 136 MHz – 174 MHz |
400 MHz – 520 MHz | |
Reception | 68 MHz – 108 MHz |
136 MHz – 174 MHz | |
400 MHz – 520 MHz |
Based on the specs Baofeng radios should support FM reception – see the frequency allocation in the chart below.
![FM BCST ALLOTMENTS](https://upload.wikimedia.org/wikipedia/commons/thumb/d/d6/FM_BCST_ALLOTMENTS.svg/512px-FM_BCST_ALLOTMENTS.svg.png)
However many users have reported issues with this feature
Before diving into solutions, we recommend viewing this video for how to configure your radio for FM reception.
If the problem persists, let’s get into solutions to the problem.
Solution 1
Make sure the antenna is on tight (but not too tight as over-torquing can damage the RF connectors).
Try changing the antenna. Baofeng radios have a removable antenna and can be easily replaced with another one.
If this didn’t solve the problem, let’s move on to the next solution.
🏷️ Baofeng Radio Deals ⭐⭐⭐⭐⭐
Solution 2
Try factory resetting the Baofeng. The video below shows the process.
If this didn’t solve the problem, let’s move on to the next troubleshooting tip.
Solution 3
Try moving to a different location. It’s possible that you’re outside the range of an FM tower.
Solution 4
Note that the radio will not go into FM mode while it is currently receiving other frequencies. If you are tuned to another broadcast it will not switch automatically. As well, if you have squelch set to 0, it will also not switch to FM (since the device is always receiving). Make sure that you are able to tune to FM.
Solution 5
Tune to FM band and turn the volume to max, you hear a faint “ticking” sound at a regular interval, there’s a strong likelihood that your Baofeng is missing the FM radio receiver chip.
There were many chip shortages globally during and after the pandemic. Baofeng radios were affected. Many resellers however are advertising and selling these devices with no warning or notice of the missing feature. The Baofeng Blog confirms this.
As well, now many of these radios are showing up on eBay so buyer beware!
Note that if you hear static, it doesn’t necessarily mean that the radio is missing the chip. Radios can product static even if they have the required electronics for the desired band of frequencies.
Related Posts
🏷️ Baofeng Radio Deals ⭐⭐⭐⭐⭐